This MOC is my take on a playscale Marauder from Star Wars The Bad Batch. This ship is about 1/72 scale and features 1950 pieces. If you have any questions feel free to ask!

Dimensions - Flight Position Length: 16.5 in / 42 cm  Width: 20 in / 51 cm Height: 12.5 in / 31.75 cm

Dimensions - Landed Position Length: 16.5 in / 42 cm  Width: 5.75 in / 14.5 cm Height: 11 in / 28 cm

Main Features:

• Movable wings

• Retractable landing gear

• Interior with seats for 8 figures

• Boarding ramp

• Rear gunner seat

See video for handing and features @youtube

Stability and Handling: The ship is relatively stable for the size however, due to the weight and size of the wings they will click down if shaken enough but should not fall apart. I haven't had any issues with the ship as it has been sitting on my shelf in flight position for the past year with no issues. 

Holding the ship from the bottom around the neck area or beneath the landing gear is the sturdiest. It cannot be held from the top fin as that is designed to detach for interior access.

Notes: To seat 2 figures in the front seats they must be positioned as shown below or else the hand will interfere with the side walls.

Parts in white can be replaced with any color.

As of 7/12/26 Bricklink estimates ~220 USD excluding shipping (No stand)

Some inspiration for the nose was from 2bricks MOC.

The ship measures around 14 in tall when mounted on the stand in flight position. Stand can be found here and the base is Edge of Bricks design.